MANNOL 5L Coolant Antifreeze G12+ RED Ready Mixed -30°C / +125 German Hi Spec

Product Information

A type of glycol and water are often blended 50/50 to create coolant, also known as antifreeze. The antifreeze component of the mixture, represented by the glycol, ensures that the fluid won’t freeze during severe winter weather. In extremely hot temperatures, glycol also keeps the coolant from boiling. Under all climatic extremes and driving circumstances, it maintains consistent engine temperatures. What Kind Of Antifreeze Is Pink Although the G11 coolant class prevents further corrosion from occurring, it has low stability, poor heat transmission, and brief service life. The G11 coolant can harm the cooling system components when it is worn out because it becomes abrasive. The G12 is red or pink. It has carboxylate and ethylene glycol. It can be used in high-performance engines with 90 to 110 operating temperatures. Every type of engine coolant is made from a mixture of ethylene glycol or propylene glycol with a unique blend of additives. Engine coolant flows through the cooling system and engine to remove heat from the hot motor. It also ensures that the coolant doesn’t freeze during the winter.

The difference between G12 and G13 is that the second has a propylene glycol base, and the environmental safety class is several times higher. G12 is a pink or red coolant based on ethylene glycol and carboxylate. It doesn’t contain silicates, and has a service life lasting from four to five years. G12 coolant is used in model years 1996 to 2001. The freezing point of this coolant is -50° C or -58° F with a boiling point of 118° C or 245° F.

The question often arises - is it possible to mix different antifreezes? To do this, you need to delve into the characteristics of each coolant to understand compatibility. The Pentofrost SF coolant is an eco-friendly antifreeze for water-cooled engines. It does not contain amines, nitrites, phosphorus additives, and silicates. However, it delivers acceptable protection and cooling performance. This coolant meets the following specifications, ASTM D-3306, TL 774 F, and it’s approved for Ford, GM, and Land Rover vehicles. Pentofrost SF has a pink color. However, G13 coolant is not advised for use in older cooling systems with brass or copper radiators as well as heaters. G11 as well as G12 are the most suitable options for these materials. Best Coolant for Your Car

The most frequently asked question, regardless of whether you’re instructed to use VW G12 coolant or another kind, is “Can two types of antifreeze be mixed together?” Or, “ can you mix coolant colors together“, as well as “ can you mix antifreeze together“. This might be feasible in some circumstances. Again, a good rule of thumb, look in the owner’s manual. If you can’t find it in the manual, it also should be marked on the coolant tank itself. Early Volkswagen’s and Audi’s from the model years 1980 – 1997 use G11 Coolant, 1998 – 2008 use G12+, and 2008-present use G12++ Coolant& G13 Coolant. However, it’s not always a one-size-fits-all when it comes to engine coolant. That’s why we advise looking at the manual and/or engine coolant tank. the shelf life does not exceed 3 years, regardless of the mileage. During operation, the protective layer becomes thinner, these pieces, getting to the coolant, lead to its accelerated wear, as well as damage to the water pump; The fundamentals of Volkswagen G12 coolant are covered in this guide. We also indicate whether you must use this type or if you have a choice of another kind. Finally, we’ll discuss how to select the proper coolant for your car. It performs best at high temperatures and prevents the engine from being destroyed by heat caused by combustion and friction.It provides optimum anti-freeze, overheating and corrosion protection. Its special composition raises the water’s boiling point to 135C (275F) while preventing evaporation, and lowers the freezing point to -40C (-40F) while maintaining a constant pH value. RELATED: Can You Use Water Instead of Coolant? (Why You Shouldn’t) G11 vs. G12 vs. G13 Antifreeze 1. G11 The most obvious difference between coolants is the color, but that’s just about appearance. What’s most important is how the composition differs. G11 uses ethylene glycol and an inorganic base. It can be mixed with anything that’s compatible with this base. Genuine G12evo (new version of G13) coolant additives protect individual engine components, safeguarding the engine’s long service life. It contains substances that form a protective coating against corrosion, helping to prevent foaming and neutralise ‘hard’ water ie water with a high mineral content.

What is antifreeze used for? It is the working fluid of the car engine cooling system. It has a high boiling point and consists of water and additives that lubricate the pump and other CO elements.

The new class of antifreeze is available in purple. Hybrid antifreeze has a similar composition, but a more optimal ratio of silicate and organic components. It also features improved protective properties. It is recommended to change every 5 years. Antifreeze G11, G12 and G13 - what's the difference? div class="b-garage row no-gutters">

Delivery and Returns Information