GALAXYER Snow Foam Gun Sprayer, 900ml Adjustable Car Cleaning Foam Lance, Garden Watering Tool Fit Universal Garden Hose, Foam Sprayer for Car Washing Home Garden Watering

Product Information

I have been looking at investing as I hate getting the pressure washer out of the shed and am no longer a great believer in the need to snow foam. Depending on the instructions for the snow foam you use for the current amount into the bottle and then top up with water and screw onto the snow foamer. On the foamer itself will be a small knob which you can turn, this will adjust the amount of foam you get when using the spray gun.If you move the knob towards the (+) you will get more water, and if you move towards the (-) you get less water. When you have less water you will have more foam so you get a stronger mix applied to the car surface. Feel free to experiment with different mixtures until you get a foam consistency that you are happy with. A common problem is getting the right consistency when foaming. If it is too diluted (too much water), it will just slide off the car, therefore it won’t set and help to dissolve any dirt making it a pointless exercise. Before beginning it is better to have the car in a dry state, this stops the foaming from sliding off, so if it has rained or you have already washed down the car it maybe better to leave it to dry before snow foaming. Consistency One the car is foamed it is time to leave it. You want to cover the car with an even layer of the foam and allow it to sit for ten minutes at least. Once you have had a cup of tea it is time for you to rinse the car with water and watch the dirt slide away with the foam.

Just as clay bars emerged from the professional world into mainstream car care, snow foam is now part of just about every maker’s range, and a lance to lay it on is equally important.

Demon Shine Demon Foam With Snow Foam Gun 2 Litre

Compared to a standard car wash shampoo, snow foam is designed to be used as a pre-wash solution. This means that it loosens and removes dirt before washing your car with a wash mitt. The purpose of this is that it helps to reduce the chances of introducing swirl marks onto the paint as there will be very little dirt left on the car.

The longer you leave the foam in place the more dirt it can pull away from the surface of your car. The condition of your car will determine how long you want to leave the foam on, because dirtier cars may require longer sitting time. If your car does not come away as clean as you expected, you can always apply a second layer. Aftercare Instead of a pressure washer, use the pressure of your garden hose to cover your vehicle in soap suds or snow foam. Easy & simple. Delivered complete with a standard connector for a garden hose, or attach with a suitably sized hose clip.We’ve tested foams, but what about the cannons? We gathered nine to find the one to turn every car white. How we tested them