ASUS ZenWiFi Pro XT12 (2 Pack) - AX11000 Wi-Fi Mesh System: up to 557 Square Metres of Coverage, Security Functions, Parental Controls and Two 2.5G Ethernet Ports

Product Information

SYDNEY , Australia, February 17, 2022 —Today marked the launch of ASUS ZenWiFi ® Pro XT12, a high-performance tri-band WiFi 6 (802.11ax) mesh networking system designed to provide fast whole-home WiFi coverage. Still, for many, the XT12 will be cheaper than a full, business-class Cisco Meraki deployment but, if you’re weighing up that as an option, don’t forget to factor-in on-going support costs as part of the total cost of ownership (aka TCO). The main XT12 unit is located next to the Router and the node XT12 unit is located between Locations 1 and 2. Adding to the ranks is the new router /mesh Wi-Fi system from ASUS, the ZenWiFi Pro XT12, or XT12, because it’s 2022 and brands still feel the need to label their products in memory friendly ways.

Many routers offer 5GHz connections, but not all 5GHz routers are built the same. The ZenWiFi Pro ET12 can access a high-power 160MHz slice of the 5GHz spectrum. Only recently made available for home WiFi in the United States, this 5.9GHz band is unaffected by radar signals, and it offers wider coverage than you’ve come to expect from 5GHz. Plus, it helps that the XT12 units are easily the most aesthetically pleasing networking devices we have ever seen. The cuboid design with the Perspex top really makes them stand out (but in a good way this time) and they are something you wouldn’t need to have hidden away. In terms of speed, the 11,000 Mbps on the marketing material was nothing more than wishful thinking but also because in Singapore, the common standard offered is 1 GBPS (1,000 Mbps), which is decent but a far cry from the 4,804Mbps ASUS mentions for its 5Ghz band. The ARP response issue has been resolved, along with the connection issue between the router and the ROG Phone 6 and 7. Per Asus’ naming convention, X is short for Wi-Fi 6 (802.11a x), and E is for Wi-Fi 6E (802.11ax e). The letter T signifies that these are Tri-band broadcasters — they both have three Wi-Fi bands.

Dual 2.5G LAN and WAN Ports

Long gone are the days when upgrading your home router involved a crash course in networking. The ZenWiFi Pro ET12 and XT12 streamline the entire setup process down to roughly three minutes. After you find the right spots in your home for each mesh networking node, plug them in, and set up the main router, they’ll automatically sync up to create the wide coverage area afforded by mesh networking tech. And there are even more similarities, as you’ll note in the hardware specifications below. Hardware specifications: ZenWiFi Pro XT12 vs ZenWiFi Pro ET12 Hardware specifications: ZenWiFi Pro ET12 vs ZenWi-Fi ET8 ZenWiFi Pro XT12 vs ET12: The third Wi-Fi band changes everything

The Asus ZenWiFi Pro XT12 is a tri-band Wi-Fi 6 router with two 5GHz channels and a 2.4GHz channel that offer a combined, theoretical throughput of 11,000Mbps. You can buy either or none no matter your situation and the world will keep spinning for the foreseeable future. Wi-Fi standards: Wi-Fi 7 | Wi-Fi 6E| UNII-4 (5.9GHz) | Wi-Fi 6 | What is Wi-Fi? | Wi-Fi antennas (dBi) | Wi-Fi broadcasting/signal power (dBm)

Compare

That said, fibre speeds are not fixed, and dependent on a lot of other factors, including service provider and its network set-up, and other physical factors that end-users are not always able to control. If you only need a single unit, my take is the ET12’s support for the 6GHz band is more valuable than the XT12’s support for UNII-4 (or the fact it has a second 5GHz band). But either will do just fine and you’ll save some dough going with the XT12.

Optimized memory utilization and fixed an occasional server error when registering DDNS with an app. Additionally, on the 5GHz-2, the XT12 supports the latest UNII-4 portion to have a third 160MHz band which is free for DFS channels. By default, the ET12’s 6GHz band doesn’t have to deal with DFS. The ZenWiFi Pro XT12 is a traditional Tri-band with an additional 5GHz band (the 5GHz-2). So it has 2.4GHz and two 5GHz bands (5GHz-1 and 5GHz-2). The ZenWiFi Pro XT12 is traditional Tri-band hardware. As such, it works great in a fully wireless mesh setup. You should get it if you live in a large home and are too lazy to run network cables.For now, in my trial, that was not possible yet. No matter how much I tried, I couldn’t link them together. The AiMesh setup process would just fail every single time. And I tried many times. Technically, we’re supposed to be able to use the XT12 and ET12 hardware together in a single mesh system, per the way AiMesh works. And eventually, that likely will be the case. The message I got when adding the ZenWiFi Pro XT12 to my GT-AXE16000 Wi-Fi 6E (or the ZenWiFi Pro ET12). While this might change, it’s not a good idea to mix Wi-Fi standards in a mesh system, anyway. Ultimately, the features on offer make the XT12 feel like a souped-up consumer router with SMB-friendly features, which is no bad thing. In some ways it’s like a consumer-friendly Draytek router – a brand that is all about no-nonsense SMB Wi-Fi without the bells, whistles or performance boosts found here. But we’ll have to wait and see whether that’s enough for SMBs to actually use it as the foundation of their core network though – that level of adoption tends to take years of trust to develop. ZenWiFi Pro XT12 vs ZenWiFi Pro ET12: You must turn them on and look at the front lights to know which is which.