6 Metres Caravan/Motorhome convoluted Grey Waste Water Pipe - 23.5mm ID

Product Information

I do know that a couple of Globecar owners have had extensions but dont know what they paid. One got a local engineering company to fit a pipe extension. Pipe Sizes and descriptions can be confusing, usually because the actual pipe size bears no resemblance to its' description. Dealing with plastic systems is a lot more straightforward, as most plastic drainage pipes are designed to be compatible with each other regardless of the manufacturer. If they aren't, conversion fittings are usually readily available to make connections as easy as possible. The only caveat to this is that different connection types shouldn't generally be mixed. For soil pipes, the two main connection types are either Ring Seal or Solvent Weld, meaning that if the system you are connecting to is a Solvent Weld system, you should ideally be using Solvent Weld pipes and fittings rather than Ring Seal, and visa-versa. "But what is the difference between these two connection types?" we hear you ask. Well, fortunately enough, we have written a separate article (Ring Seal or Solvent Weld - which soil pipe system is better?) to answer just that.

In the unlikely event of a late delivery, we will be unable to compensate you for any consequential loss, so please do not organise any plant or labour before you have received your materials. Has anyone made such a modification? If so how and where did you source the parts and do you have any photos or diagrams of what you did.

COMPATIBILITY OF SOLVENT WELD WASTE PIPES

A waste system, as previously mentioned, is made up of pipes and fittings designed to carry wastewater from sinks, showers, bathtubs, washing machines, and dishwashers out to the sewer. Because these pipes shouldn't have to carry any solid waste away (stop scraping leftover food down the kitchen sink!), they don't need to be as large a diameter as the soil system pipes, meaning that less space is required to install them. The most common waste pipe sizes in the UK are 32mm (suitable for low volume outlets, such as small hand basins), 40mm (suitable for most kitchen sinks, showers, and baths), and 50mm (suitable for more commercial applications, or for connecting multiple waste pipes into a single flow. Weathering Collar - used to divert rainwater away from falling directly onto the weathering slate to provide extra protection.

It would be good to have the outlet pipe just under the side of the MH next to the pull handle of the pull valve. I would then be able to drain into a wastemaster or using Flexi pipe on a serviced pitch direct it straight into the drain on the pitch. TFind the outside diameter of your pipe to the nearest millimetre, use a tape meaasure or vernier gauge. Then find this size down the left hand column, read across the four coloured columns on the right to find the group and description of your size pipe. If your size only appears in one column, look at the top of that column to see which group it is - metric, imperial, solvent or push fit. If your pipe size appears in more than one column then it will work with all these groups. If the pipe is grey it is more likely to be pressure pipe. But please feel free to ask if you are uncertain. Conversion Bends - used to create changes in direction while also converting the connection type between push-fit and solvent weld. Delivery to non-Industrial Scotland, Northern Ireland, and CH, LL, and CA postcodes can sometimes take slightly longer, although this is dependent upon the exact location.