HP J9775A 2530 Series Blade System Network Switch Module (48G Port, 4 SFP Slots)

Product Information

For use in the JL075A 3810M switch. Also for use in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed.

For J8692A, J8693A: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D 1990-4483 and 1990-4360) ArubaOS-Switch Software Feature Support Matrix for XX.YY (where XX.YY is the software branch you're interested in) document would shed some light about which features are implemented on which XX.YY Software Branch. Table 53: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. For J9537A, J9549A, J9535A, and J9637A modules: K.15.02.0004 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 RJ-45 自动感应 10/100/1000 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T）；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工J8177C/J8177D is not supported for use in the Dual-Personality ports of the 2920 Series Switches. For use ONLY in the J9731A module.

RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only It allows real-time traffic classification with support for eight priority levels mapped to either the queues, it uses weighted deficit round robin (WDRR) or strict priority (SP). RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007J8177C/J8177D are not supported for use in the Dual-Personality ports of the 2930M Series Switches. The Aruba 2530 Switch Series supports a choice of management interfaces with Web GUI, command-line interface (CLI), and SNMP with either console or micro USB ports. For J9263A, J9264A: K.14.03 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483)