All Ride-up reel ratchet straps - magnetic - metal

Product Information

All of our ratchet straps are made from durable, hard-wearing 100% polyester webbing. This makes them tough, flexible and lightweight; key elements that help any tie-down situation. We also have a range of heavy-duty ratchet straps which are designed for tougher transportation and tie-down jobs. Our heavy-duty ratchet straps offer maximum weight limits of between 4,000kg to 10,000kg and again, come in a range of styles including j-hooks and D-rings. Browse our full range of heavy duty ratchet straps for more information. Why Choose Our Ratchet Straps? This can often be set on the drill, where the lowest speed should always be selected. For a lashing strap of about 10m, this speed can be used to wind the strap in less than 10 seconds. Please read all our recommendations in the instruction manual supplied before using the strap winder. DYNELLO® Accu Winder is our simple strap winder that offers fast and easy strap rewinding. It builds on our best experience from our electric strap winder, but adapted for fitting in your own cordless drill.

The base-plate on which the winding shaft and strap-steer are mounted forms the base structure, which ensures controlled winding of the strap. The base-plate is made of 3mm AISI 304 stainless steel, so it can withstand both drops and beatings. AISI 304, as you know, is a widely used type of stainless steel that performs well in all weather conditions. To make it even easier to find the correct strap for the job, each part of the lashing assembly is marked with the manufacturer's mark, size, length and ID mark, so that you can find the right tool more easily. Plus, for complete peace of mind, all of our ratchet straps conform to EN 12195-2:2001 safety performance requirements. More Than Just Ratchet Straps It is therefore important to maintain the strap winder by lubricating it regularly with grease or viscous oil. So if you have a drill lying around and want a simple and robust strap winder, the DYNELLO® Accu Winder is the right choice. The DYNELLO® Accu Winder is primarily designed for winding 50mm straps, but can also be used for slings and lifting straps. Think of that - the StrapWinder will probably pay for itself on its first couple of days, saving the operator a potential 2 hours per week!To help you choose the right ratchet strap for your needs, we have divided our range into two different sections: Lightweight Ratchet Straps

The StrapWinder is the ultimate load strap accessory; it's as simple as a fishing reel, having only one moving part and virtually nothing to wear out or go wrong! By using a cordless drill for strap winding, you have the advantage that the torque control on the drill can be adjusted to achieve the right ‘tightness’ of the wound strap. If the strap is very wet, you can try to squeeze out the worst of the moisture with a high torque setting. Note, however, that the more tightly the strap is rolled on the winding shaft, the more problematic removal can become. Having tried various strap winders, this has to be the best one I’ve had, very sturdy and strong, when you wind 14 straps 4/5 times a day it’s got to last and this fits the bill

Add to Wish List

Ratchet straps are tie-down straps that have various uses, generally involving the holding down of equipment or cargo when it is being transported. They can be used for jobs like securing loads to vehicles or keeping construction materials in place. The winding shaft is also machined with cone design, which makes a huge difference when the wound lashing strap is removed. In one easy movement, the strap can be removed even when the strap is wound very tightly. The slot is 50mm deep and therefore designed for winding 50mm straps. However, it is also possible to wind up to 75mm wide straps. Badly stowed straps cost time and money, become knotted, then become liable to fray or snap under extreme tension. Not to mention the frustration after a hard day's driving! The strap-steer, which also consists of two pins in AISI 304 stainless steel, is welded to the base-plate with a distance/gap of 10mm between the pins. The strap-steer is extremely efficient to ensure a nice and uniform winding and also makes, in our opinion, the DYNELLO® Accu Winder the easiest strap winder to use for a cordless drill. The strap-steer is an essential feature that DYNELLO® has developed and makes a huge difference in the ease of use of our strap winders, unlike other models on the market. In one uncomplicated movement, the strap is inserted first into the strap-steer and then the winding shaft, and with a firm hand, the strap is ensured to stay in the strap-steer during winding. Therefore, during winding, one does not have to focus on controlling the strap as if one did not have a strap-steer.