GROHE 42137 | Adagio Cistern Discharge Valve

Product Information

With the Grohe Adagio single flush valve's design you need not worry about removing the entire cistern to service the valve in future, just simply pull the valve upwards and the whole top mechanism just lifts right out. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I have replaced the piston seals (43808) to try to cure a continuous trickle of water into the toilet bowl but this has not worked.

With all budget options considered alongside a medley of contemporary, traditional and designer styles, we're certain that we'll have what you're looking for. We advise purchasing a couple of these washers and discharge pistons at a time so you've got one readily available in the event that the washer fails again in future. Many make the mistake of purchasing a full replacement flush valve at the first sign of any issue, replacing just this washer and discharge piston may save you a lot time and money in the long-term. If your Grohe Adagio flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer and discharge piston need to be changed.

It is your responsibility to check the product detail and item specifics where the information is provided. NOTE: Manufacturers often alter colour of product to indicate the date of supply for warranty reasons. Our company registration number is 179511 and our VAT registration number is 113769075 PlumbinBits Ltd 2 Murrayfield Road, Braunstone, Leicester. The part supplied was slightly different internally to the original but when fitted it functioned correctly.

All available replacement spare parts to fit the Grohe Adagio 6L Cistern Side inlet - 37762 SH0 (37762SH0). GROHE Adagio Cistern Discharge Valve, GROHE has been committed to the brand values of technology, quality, design and sustainability that all illustrate GROHE’s commitment to creating exceptional experiences. If you're interested in Grohe Single Flush Pneumatic Drop Valve To Suit Adagio Cistern 42137000, view the rest of the range or have a scroll through our other suppliers to find the perfect Bathrooms for you. Manufacturer specifications can alter at any time and we to note these changes but cannot be hold responsible for alterations beyond our control. To be used with Grohe concealed cisterns with a single flush push button (not suitable for dual flush / twin button systems).Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. The problem is that there is a constant trikle of water into the bowl which causes the cistern to re-fill every 30 minutes. The short version is the normal height fitted in most of the Adagio cisterns but some of the earlier versions and some close coupled suites had a taller version, so the 42137 is a suitable replacement that can be cut down if required.

All that remains is to clip the new valve into place, adjust the valve to the desired height and connect any other mechanisms that may be required. PLEASE NOTE CERTAIN PARTS OF SCOTLAND, IRELAND and the ISLE of MAN will not be next day if chosen and will take an extra day.SIZES: Please be aware that many sizes shown are the industry standard sizes and may not be the physical measurement of the product.