Der große Vorteil, ich musste kein extra Mikro bestellen und konnte mein schon lang bewährtes System weiter nutzen. Ich habe schon seit längerem die Rode Wireless GO II Mikros und bin wirklich begeistert. Rode halt! The Wireless GO system auto-pairs in under three seconds and transmits via RØDE’s Series III digital 2.4GHz transmission, which is optimised for shorter range operation in dense RF and Wi-Fi environments, but also offers an impressive line-of-sight range of 70m. There is a 3-stage gain control to tailor your output precisely to your camera or recording device and a handy battery-saver mode. The in-built lithium-ion batteries last up to 7 hours and are charged via USB-C. All-In-One For Run ‘n’ Gun

Transmission is via digital 2.4GHz for up to 200m line of sight range, and 128-bit encryption is used to prevent crosstalk.

RODE Interview GO

These are exclusively made for the Wireless GO, with particular trims and cuts meant to connect to the clip of the Wireless GO. You’ll be happy to know these are compatible with both the first and second generations of the Wireless GO as they have the same hardware dimensions, so original Wireless GO owners like me aren’t left in the dust. Thankfully. And if you do decide to upgrade to the Wireless GO II, you can rest assured these will continue to be relevant in your audio setup.

The dual receiver has a display that shows information including incoming audio per channel, reception quality, battery life, volume and recording status, whilst a 3.5mm TRS output allows analogue audio connection, whilst USB-C allows for iOS digital output. The internal rechargeable Lithium-ion battery can be charged via 5V, 0.3A USB.Frequency range: 50Hz to 20kHz. Maximum input level: -20dBV, 3.5mm input. Maximum SPL: 100dB SPL, 1m, microphone. Transmission range: 200m, line of sight. Dimensions (WxHxL): 45.3 x 18.3 x 44mm, transmitter; 45.5 x 18.3 x 44mm, receiver. Weight: 30g, transmitter; 32g, receiver. Another thing you can do however is use it as a light, wireless option for video livestream or podcasting, pairing it with a mic table or floor stand and have it when on the move or a smaller setup if your main mic is stationary at your workplace or home, especially if they’re too big, clunky or heavy to lug around with you and take time to setup. This is a nice alternative or even replacement if you’re happy with the Wireless Go sound and approach to capture. The Wireless PRO receiver features an LCD display that shows you critical information including audio levels, connectivity, and recording status. System settings can also be controlled via the receivers menus and left/right navigation buttons, either with a short-press (less than 1 second) or long-press (1 second or more). Three buttons allows the use to operate functions depending on which screen is displayed, corresponding to the on-screen symbols. Included accessories: 3x SC20 USB-C to USB-A cables, 1x SC5 TRS to TRS memory cable, 3x furry windshields, 1x carry pouch bag. Included accessories: 1x SC21 USB-C to Lightning cable, 1x SC22 USB-C to USB-C cable, 1x SC2 3.5mm TRS to TRS cable, 1x SC7 3.5mm TRS to TRRS cable, 2x furry windshields, and a carry pouch